Heat Exchanger Plate
Showing 151–175 of 202 results
-
Heat Exchanger Plates model HM
Chester Jensen York, Heat Exchanger Plates model HM
... -
Heat Exchanger Plates model P13
DeLaval, Heat Exchanger Plates model P13
... -
Intermediate Terminals model HM
Chester Jensen, Intermediate Terminals model HM, 2.5″ tri clamp ports.
... -
ITT Bell & Gosset, Plate Heat Exchanger model GPX807-231
ITT Bell & Gosset, Plate Heat Exchanger model GPX807-231, (231) 304 stainless steel plates, 1848 square foot, rated 150 PSI at 230 degree F, 6″ inlets & outlets, National Board #176...
-
ITT Standard, Plate Flow Heat Exchanger model PF321
ITT Standard, “Plate Flow” Heat Exchanger model PF321, 10″ x 30″ plate type, all stainless steel food grade construction, 1.5″ inlet & outlet with tri clamp connec...
-
ITT Standard, Plate Heat Exchanger model PF15
ITT Standard, Plate Heat Exchanger model PF15, stainless steel product contact parts, 37 plates 9-3/4″ x 28″ for approximate 30 square foot surface area with 2″ inlet/outlet, rate...
-
Mojonnier, Plate Chiller model 434
Mojonnier, Plate Chiller model 434, with #332 Platcoil panel, set to run ammonia thru plates, product runs down outside of plates to cool, 3 stainless steel plates 48″ x 12″ x 3/4″...
-
Mueller, Accutherm Plate Heat Exchanger model AT20C20
Mueller, Accutherm Plate Heat Exchanger model AT20C20, 111 square foot, stainless steel, maximum working pressure 100 PSI at 150 F, carbon steel 2″ NPT, carbon steel 1.5″ NPT with 1R...
-
Mueller, Accutherm Plate type Heat Exchanger model AT10F20
Mueller, Accutherm Plate type Heat Exchanger model AT10F20, approximate 200 square foot surface area, 128 plates 8″ wide x 30″ high, rated 100 PSI at 190 degree F, maximum pack length 2...
-
Mueller, Painted Frame Tie Bar Plate Heat Exchanger model AT161SS-B-10
Mueller, Painted Frame Tie Bar Plate Heat Exchanger model AT161SS-B-10, 3″ clamp connections, 4 total plates
... -
Mueller, Plate Heat Exchange Frame model AT4C-20
Mueller, Plate Heat Exchange Frame model AT4C-20, mild steel, tie bar, maximum working pressure 100 PSI at 250 degree F, 26″ high x 7.5″ wide, 18 plates total
... -
Mueller, Plate Heat Exchange Frame model AT4C-20
Mueller, Plate Heat Exchange Frame model AT4C-20, mild steel, tie bar, maximum working pressure 100 PSI at 250 degree F, 26″ high x 7.5″ wide, 25 plates total
... -
Mueller, Plate Heat Exchanger model A1110C20
Mueller, Plate Heat Exchanger model A1110C20, hot water system, 2 HP circulating pump, 3450 RPM, system unitized on stand with inline temperature sets & controls for valves, heat exchanger app...
-
Mueller, Plate Heat Exchanger model AT40SS B-20
Mueller, Plate Heat Exchanger model AT40SS B-20, all stainless steel construction, approximate 1000 square foot surface area, 270 plates 16″ x 54″, rail length 8′, plate capacity ...
-
Mueller, Plate Heat Exchanger model ATI59FFF-10
Mueller, Plate Heat Exchanger model ATI59FFF-10, 28 plates 41″ long x 12″ wide for a total surface area of approximately 95 square feet, rated for 58 PSI at 150 degree F
... -
Open Chill Flume Open Wash Flume
Open Chill Flume/Open Wash Flume, with plate chiller, stainless steel, 16″ wide x 24′ 10″ long x 8″ deep chilled water flume trough with 2 plate chillers mounted inline over...
-
Paul Mueller, Plate Heat Exchanger model AT161B-10
Paul Mueller, Plate Heat Exchanger model AT161B-10, stainless steel, approximate 150 square foot, (23) 18″ wide x 54″ plates, part #9814361
... -
Paul Mueller, Plate Heat Exchanger model AT405 F-20
Paul Mueller, Plate Heat Exchanger model AT405 F-20, approximate 194 square foot, National Board #26601, maximum working pressure 100 PSIG at 280 degree F, MDMT 32 degree F at 100 PSIG, (60) 16R...
-
Plate Heat Exchanger
Plate type Heat Exchanger, stainless steel, 30 plates 12″ wide x 44″ long for a total surface area of 110 square feet, manual hand crank, 2″ inlet/outlet
... -
Plate Heat Exchanger
Plate Heat Exchanger, stainless steel, 11 plates 5″ x 17.5″ with 1″ inlet/outlet, unit missing name plate, no information for pressure rating or model
... -
Plate Heat Exchanger Frame model HM45
Chester Jensen, Plate Heat Exchanger Frame model HM45, stainless steel, 2.5″ tri clamp ports, single take up.
... -
Plate Heat Exchanger model 3201
Plate Heat Exchanger model 3201, certified by APV Americas-Goldsboro, maximum allowable pressure chamber 1 H1&H4 150 PSI at 185 F, chamber 2 H2&H3 250 PSI at 185 F, minimum design metal t...
-
Plate Heat Exchanger model HM
Chester Jensen, Plate Heat Exchanger model HM, stainless steel, can be engineered to meet specific duties, 2.5″ bevel seat connections, single take up, size 55
... -
Plate Heat Exchanger model HM
Chester Jensen, Plate Heat Exchanger model HM, stainless steel, can be engineered to meet specific duties, 2.5″ bevel seat connections, single take up, size 76.
... -
Plate Heat Exchanger model HM
Chester Jensen, Plate Heat Exchanger model HM, stainless steel, can be engineered to meet specific duties, 2.5″ bevel seat connections, single take up, size 80.
...
Recent Comments