Chopper/Cutter
Showing 76–100 of 124 results
-
Rietz, 6″ Extructor model RE6-K5F424
Rietz, 6″ Extructor model RE-6-K5F424, stainless steel construction, approximate 6″ diameter x 24″ long chamber with 12″ jacketed section rated 40 PSI, 4.5″ wide feed ...
-
Rietz, Continuous Horizontal Screw Press model RSP16K2
Rietz, Continuous Horizontal Screw Press model RSP16K2, previously equipped with 25 HP US vari speed main drive, thru heavy duty gear box, 7.5 HP vari speed drive on rotating cone, stainless steel ...
-
Rietz, Disintegrator model RP6K115
Rietz, Disintegrator model RP6K115, stainless steel sanitary contact surfaces, 3 HP Reliance variable speed drive direct coupled to mill rotor, 1800-12000 RPM, 230/460/3 phase voltage amp meter, 12...
-
Rietz, Extructor model RE14
Rietz, Extructor model RE14, stainless steel construction, canti levered design, 14″ diameter x long barrel, jacketed barrel, 18″ x 22″ feed opening with power feed with die Platt...
-
Rietz, Fluffer Mill model RF18K
Rietz, Fluffer Mill model RF18K, unit has stainless steel contact parts, unitized on stand, less drive, unit requires approximately 20 HP drive, 10″ diameter feed, similar to a garbage dispos...
-
Security Engineering Machinery, Rotary Knife Mill model 10B
Security Engineering Machinery, Rotary Knife Mill model 10B, “Security Disintegrator”, (3) 11.5″ knives & 2 bed knives, heavy duty perforated metal screen with 3/8″ hole...
-
Sprout Waldron Koppers Mill model DM24
Sprout Waldron Koppers Mill model DM24, primary peanut butter Mill, Koppers screw feeder, stainless steel contact, 10″ x 10″ flanged inlet, 9″ diameter auger feed screw, 14″...
-
Stephan, Microcut MCHD 30 II Cutter
Stephan, Microcut Type MCHD 30 II Cutter / Emulsifier, stainless steel construction, driven by 30kW motor. Rated for 440-volt, 3,540 RPM, 3-phase, 60-cycle, 40 HP, Offered with stainless steel feed...
-
Stephan, TK Combi cut Mixer
Stephan Machinery, TK Combi cut Mixer, Model TK 300-S, Stainless Steel Drum capacity 300 Liters, batch size: 100-220 Liters. Capacity (dependent on product) up to 1200 Liters per hour. Non jacketed...
-
Stokes, Granulator model 900-43-6
Stokes, oscillating Granulator, model 900-43-6. Features all stainless steel contact surfaces, oscillating stainless steel rotor constructed of hexagonal shaped breaker bars over stainless steel ch...
-
Twin Roll Lump Breaker
Twin Roll Lump Breaker, stainless steel construction, 7″ diameter x 34″ long stainless steel shafts with welded pins that over lap during rotation, pins size 1/2″ diameter x 4R...
-
Ultrasonic Food Cutting Machine, Dual Station Knives
Dukan, Ultrasonic food cutting machine, dual station knives, 12″ wide conveyor belt x 56″ long with adjustable side rails, 1/2 HP stainless steel motor, all SS cabinet measures 49″...
-
Urschel Dicer (Model GA)
Urschel Model G-A dicer, set up for 5/16″ dices. Mounted on stainless steel portable frame with control panel. Driven by 2 HP, 208 Volt, 3-phase 60 Hz motor. Previously used at production kit...
-
Urschel dicer model RA
Urschel Model RA Dicer, Stainless steel contact & construction, set for 3/8” Dice, hopper infeed, with 2 Hp.-230/460 Volt motor, start/stop switch, With power cord plug-in, with all chute...
-
Urschel G dicer
Urschel G dicer, driven by 2 HP motor, previously dicing apples 3/8″ x 3/8″. Currently less cutting blades. In good working condition when removed from service in 2018. Dicer can be off...
-
Urschel M Dicer, Strip Cutter
Urschel M Dicer, Strip Cutter, Stainless Steel construction. Capable of cutting square or rectangular dices from 1/8″ x 3/16″ to 1-1/2″ x 3″, maximum thickness 1″ (Var...
-
Urschel model H Dicer
Urschel model H Dicer, cube cutter, strip cutter, slicer, 3 dimensional, rated for products input sized up to 5.5″ in any dimension. Slice thickness: From 1/8″ (3.2mm) up to 3/4″ ...
-
Urschel Model HA Dicer
Urschel Model H-A Dicer, Stainless Steel Contact & Construction, Set Up for 1″ Dice, Stainless Steel Frame Mount, with Heavy Duty Casters
... -
Urschel, Bias Cut Slicer model OC
Urschel, Bias Cut Slicer model OC, 3.5″ wide belt conveyor & accelerator feed belt conveyor, previously running approximate 5000 pounds/hour on various vegetables, capable of slicing elo...
-
Urschel, Comitrol Dicer model 3600
Urschel, Comitrol Dicer model 3600, stainless steel, with 10 HP 3/60/220/440/3490 RPM direct drive motor, missing cutting head, motor needs work
... -
Urschel, Comitrol Dicer model MG
Urschel, Comitrol Dicer model MG, stainless steel, with 30 HP, 230/460 volt, 3600 RPM drive motor, unitized on stainless steel stand with electrical box.
... -
Urschel, Comitrol Dicer model MG
Urschel, Comitrol Dicer model MG, 15 HP belt drive with standard cutting head.
... -
Urschel, Comitrol Dicer model MG
Urschel, Comitrol Dicer model MG, with 15 HP 220/440 volt belt drive, on stainless steel stand
... -
Urschel, Comitrol model 1500
Urschel, Comitrol model 1500 mill. Features all stainless steel contact surfaces, micro cut head with standard impeller, belt driven by 30 HP motor @ 3550 RPM, 230/460/3 phase voltage, 71/35. 5 amp...
-
Urschel, comitrol model 1700
Urschel, comitrol processor model 1700, 15 HP with slicing head. Continuous food grade milling machine for particle size reduction. Cone hopper infeed with safety grid in hopper. Set with 30 paddle...
Recent Comments