Bottle Making
Showing all 24 results
-
1,700 cubic foot Aluminum Silo
1,700 cubic foot capacity Aluminum Silo, 12′ diameter x 15′ T/T plus 6′ length cone bottom, previously used as PET pellet storage
... -
Bottle Blowing Machine Line
Complete bottling line from blow molding to end-of-line shrink wrapper. Includes Model KM4A-2L Automatic 4-Cavity bottle blowing machine including Preform unscrambler, rated for 5,000 BPH, set up f...
-
Foremost Pipe Granulator (Model PG-2415)
Foremost model PG-2415 pipe granulator. 15″ X 24″. Has 3-knife rotor with 2 bed knives. Driven by 50 HP motor, 230/460 volt, 3 PH, 60 hz. Includes 3/8″ and 3/4″ screens.
... -
Foremost Plastic Granulator
Foremost, plastic granulator having approximately an 11″ X 14″ throat opening with a 2-knife semi-open rotor. Rotor is belt driven by approximately a 15 HP motor. Pelican type hopper. W...
-
Foremost Plastic Granulator Grinder model HD6
Foremost, Plastic Granulator/Grinder model HD6, carbon steel contact parts, 15 HP motor drive 440 volt, 18″ diameter x 15″ wide grinding chamber, inlet at 14″ front to back, 15...
-
Foremost Plastic Granulator Grinder model HD6
Foremost, Plastic Granulator/Grinder model HD6, carbon steel contact parts, 15 HP motor drive 440 volt, 18″ diameter x 15″ wide grinding chamber, inlet at 14″ front to back, 15...
-
Foremost Resin Blending System
Foremost model VDBL Resin blending system, 2- 100 gallon feed hoppers, 2 Foremost blowers, Foremost model SEP-GA-4 metal separator, 56″ W X 70″ L X 101″ OAH
... -
Foremost Resin blending system (Model VDBL)
Foremost, model SHD-6 Regrind system, includes covers, valves, blowers and electrical boxes. Scott Industries, model VB-J300 material Blender. Eriez, model 15A vibrating hopper.
... -
Foremost, plastic granulator
Foremost, plastic granulator having approximately an 11″ X 14″ throat opening with a 2-knife semi-open rotor. Rotor is belt driven by approximately a 15 HP motor. Pelican type hopper. W...
-
Siapi, 2 head Stretch Blow Molder model EASP20.200
Siapi, 2 head Stretch Blow Molding Machine Model EASP20.200, PET bottles, two step, can go up to 4 mold cavities, 43mm neck finish, 30 bottles per minute, 1 gallon square bottle currently running.<...
-
Uniloy 2 head Reciprocating Screw Blow Molder model R-2000
Uniloy, 2 head Reciprocating Screw Blow Molder model R-2000, 24″ center head spacing, 2000 gram (4.18 pound) shot size capacity, 46.5″ x 20″ clear platen size, 12″ minimum s...
-
Uniloy 2-Head Blow Molder (Model R2000-100-2)
Uniloy, reciprocating screw 2-head Blow Molder. Model R2000-100-2. Dual heads are on 24″ centers with approximately 2″ OD tooling installed. Has 54″ X 21″ overall platen siz...
-
Uniloy 4 head Bottle Mold 128 ounce
Uniloy, 4 cavity Bottle Mold, #80200, 128 ounce, for oval handle bottle, designed for use with 350R blow molder, includes trim tooling, part WT, 143 grams without flash, 38mm cap size
... -
Uniloy 4-Head Blow Molder (Model 350R2)
Uniloy, Reciprocating Screw Blow Molder model 350R2, 4 head, 3.5″ screw size, one gallon blow molding system rebuilt spring of 2021. Features: 1/2 gallon molds, (4) blow molds for industrial ...
-
Uniloy 6 head Bottle Mold for 32 ounce LDL bottle
Uniloy, 6 cavity Bottle Mold, #60043 for 32 ounce LDL bottle, trim tooling, previously used with Uniloy model 350R & 250R blow molders, part WT, without flash 49 grams
... -
Uniloy 6-Head Reciprocating Screw Blow Mold (Model 350R3)
Uniloy, model 350R3 6-head reciprocating screw blow molder. Has 8″ centers, 28.5″ wide X 15″ high Clear platen on each side of center guide rods, and 90 ton clamp tonnage. Include...
-
Uniloy Blow Molder (Model 350R4)
Uniloy, Blow Molder model 350R4, Equipped with (7) programmable heads with Maco 8000 control programmer. Blow molder is equipped with 1600 gram shot capacity. Previously used on 1 liter bottles. Ma...
-
Uniloy Bottle Mold for 200 ounce bottle
Uniloy, 4 cavity Bottle Mold, for 200 ounce handle bottle #90144, designed for blow molder with 14.5″ centers, includes trim tooling, part WT, 250 grams without flash
... -
Uniloy Model 2014 (2) Head Blow Molder
Uniloy Model 2014 (2) Head Reciprocating Screw Blow Molding Machine, Head configuration: 2 heads with 8” distance between die centers, upgraded with the following items: Air cooled barrel, Baldor...
-
Uniloy Model 350R2 (4) Head Blow Molder
Uniloy Model 350R2 (4) Head Reciprocating Screw Blow Molding Machine, Head configuration 4 heads with 8″ center to center distances between heads. Machine features the following: Air cooled b...
-
Uniloy Model 350R2 (4) Head Blow Molder
Uniloy Model 350 R2 (4) Head Reciprocating Screw Blow Molding Machine. Head configuration- 4 heads with 8″ center to center distances between heads Number of tie bars- 4 Single rotac clamp cl...
-
Uniloy Model 350R3 (4) Head Blow Mold
Uniloy Model 350 R3 (4) Head Blow Molding Machine. Complete Line: Type- reciprocating screw. Head configuration- 4 heads with 10 1/8″ center to center distances between head dies. Extruder diamet...
-
Uniloy Plastic Bottle Mold for 42 ounce
Uniloy, plastic bottle mold for 42 ounce LDL squeeze bottle. 5-cavity design, includes trim molding. Previously used with Uniloy 350R and 250R blow molders. Includes trim tooling. Part wt. 63.4 gra...
-
Uniloy, Model 350R4 (3) Head Blow Molder
Uniloy, Model 350R4 (3) Head Blow Molding Machine Head configuration (3) heads with 14.5” center to center distances between heads, Heads are “large gut” and programmable, Extruder diameter 3...
Recent Comments