     
New Arrivals
Inventory |
|
Item # |
DESCRIPTION |
|
52304p- |
Alfa
Laval, Spiral Heat Exchanger, 750 square foot, 125 PSI at 350º F,
National Board #16800 |
|
52972p- |
Alpha
Laval, Spiral Heat Exchanger type H1, 55 square feet, stainless
steel, National Board #12936, rated at 75 PSI at 250º F, shell is
constructed of .109" thick 240-316 stainless steel, head is
constructed of .9" thick 516-70 steel, unit is held together with 36
J bolts, 1" flanged inlets & outlets, 27" deep x 9-3/8" wide
dimensions, supported on 2 legs, manufacturer #16734 |
|
34645- |
APV,
Double Tube Heat Exchanger model G1, 2" x 96", stainless steel
welded construction. |
|
50247- |
APV, Heat
Exchanger, 2 barrel direct expansion, 6 x 72, all stainless steel,
each barrel has 20 HP SEW Eurodrive motor with 302 final RPM |
|
37728- |
APV, Shell
& Tube Heat Exchanger model SU1462, skid mounted hot water make up
system with Bell & Gossett, Worthington 15 HP 3500 RPM circulation
pump Fischer 1.5" steam calve & Sarco steam trap approximate
capacity of 300 gallons per minute |
|
46540p- |
APV, Shell
& Tube Heat Exchanger. |
|
52425- |
Bell &
Gosset, Shell & Tube Heat Exchanger model SU1042, for hot water make
up set |
|
40535p- |
Bell &
Gossett, HTST hot water model SU632set, 2" inlet & outlet, mounted
on mild steel frame, 3/4" copper tubes, tube dimensions 40-1/8" long
x 6-5/8" diameter, National Board #21840, complete with steam trap &
2 HP pump 3450 RPM 208-230/460 volt, maximum working pressure 150
PSI at 375º F, minimum temperature -20º F at 150 PSI |
|
51646-New |
Bell &
Gossett, Shell & Tube Heat Exchanger model CHX6484L, 6" diameter x
48" long, NPT ports, mild steel shell, copper tubes, 300 PSI shell,
150 PSI tubes |
|
37695p- |
Bell &
Gossett, Shell & Tube Heat Exchanger model SU1042, with steam valve
& pressure gauge, 11" round x 4' long with Worthington model D824
pump 4 x 3, S/N RHH5RW6- pump (on unit) Borden Inc, FVB31459, B&G,
H79322, 6A351CF811, PO18710, AEL, 1D18, National Board #15203 |
|
51647- |
Bell &
Gossett, Shell & Tube Heat Exchanger model SU1062, copper tubes, 2
pass, 4" FPT water ports, 6" flanged steam inlet, 150 PSI MWP, 300
GPM maximum flow rate, on stainless steel stand with Worthington 3
HP mild steel centrifugal water pump, 8' 6" long x 24" wide x 7' 4"
high, National Board #38102 |
|
51648- |
Bell &
Gossett, Shell & Tube Heat Exchanger model SU1082, stainless steel
tubes & head, 2 pass, 4" FPT water ports, 6" flanged steam inlet,
150 PSI MWP, 300 GPM maximum flow rate, on mild steel frame, no
pump, 10' long x 26" wide x 7' high, National Board #25401 |
|
37729- |
Bell &
Gossett, Shell & Tube Heat Exchanger model SU1274, skid mounted hot
water make up system, Burks DF6-2-1/2 1.5 HP centrifugal water pump
Taylor 2" steam valve & steam trap |
|
51649- |
Bell &
Gossett, Shell & Tube Heat Exchanger model SU424, copper tubes, 4
pass, 1" FPT water ports, 1-1/4" steam inlet, 150 PSI MWP, maximum
flow rate 17 GPM, 28" long x 4" diameter, National Board #56298 |
|
51650- |
Bell &
Gossett, Shell & Tube Heat Exchanger model SU432, copper tubes, 2
pass, 1-1/4" FPT water ports, 1-1/4" steam inlet, 150 PSI MWP,
maximum flow rate 34 GPM, 40" long x 4" diameter, no name plates |
|
51645- |
Bell &
Gossett, Shell & Tube Heat Exchanger model SU654, 6" diameter x 5'
long, 1-1/2" FPT water ports, 3" FPT steam inlet, 1" FPT condensate
outlet, 150 PSI, 4 pass U tube design, all stainless steel
construction |
|
32734- |
Bell &
Gossett, Shell & Tube Heat Exchanger model SU852, rated for 150 PSI
at 375º F, National Board #594263, 3" connections. |
|
43042p- |
Bell &
Gossett, U Tube Heat Exchanger 12.7 square feet, 150 PSI on both
shell and tube sides, 3/4" tube of 316 stainless steel, 2" tri clamp
fittings on end for product inlet and outlet, 2" diameter carbon
steel shell, Overall size 4' long x 8" diameter, weight 95 pounds |
|
27615p- |
Blaw Knox,
Shell & Tube Heat Exchanger, 1100 square foot, 40 PSI at 250° F
shell & tube sides, stainless steel shell & tubes, 3/4" OD tubes,
161" overall length, 24" diameter, shell side 10" & 3" connections,
tube side 4" & 3" connections, previous use was chemicals |
|
42976p- |
Blaw Knox,
Shell & Tube Heat Exchanger, 1100 square foot, 40 PSI at 250º F
shell & tube sides, stainless steel shell & tubes, 3/4" OD tubes,
161" overall length, 24" diameter, shell side 10" & 3" connections,
tube side 4" & 3" connections, previous use was chemicals |
|
51324- |
Blaw Knox,
Shell & Tube Heat Exchanger, 30 square feet, has (23) 1.5" diameter
x 40" long stainless steel tubes rated for full vacuum at 400º F,
shell is carbon steel with pressure rating of 50 PSI at 400º F (no
National Board number), has 10" flanged steam inlet & 4" sanitary
condensate outlet on tube side, shell has 1.5" threaded inlet & 2.5"
threaded outlet, both ends open up for inspection & cleaning |
|
51651- |
Cemline,
Shell & Tube Heat Exchanger, all stainless steel U tube design,
4-1/2" diameter x 7' 3" long, 150 PSI design for heating with steam,
flanged head with 1-1/2" FPT ports, mounted on stainless steel stand |
|
42041p- |
Chemetron,
Shell & Tube Heat Exchanger, all stainless steel, 8 square foot with
polished finish, acceptable for food use, Votator division features
6" diameter body x 36" long, tubes are rated for 15 PSI at 400º F,
shell is rated for 50 PSI at 400º F, (2) 1" shell inlets to tube
side & 3 NPT inlets for supplementary items, 2 mounting posts
attached to body, former use food ingredients |
|
8491- |
Crepaco,
4" Spiral Holding Tube, mounted on stainless steel floor stand,
100,000 pounds per hour capacity. |
|
51661- |
Double
Tube Heat Exchanger, single pass, stainless steel, 3" diameter
product tube, 89" long, 4" diameter jacket tube with 1-1/2" jacket
ports, all ports tri clamp, 104" overall length |
|
51658- |
Feldmeier,
Multi Tube Heat Exchanger, all stainless steel, (3) 20' heat
exchanger pipe sections with 5-1/2" product tubes in each 2-1/2"
diameter pipe, 90 degree U bend connections between pipe units, all
mounted on stainless steel ceiling mount rack |
|
51657- |
Feldmeier,
Multi Tube Heat Exchanger, all stainless steel, (4) 20' heat
exchanger pipe sections with 5-1/2" product tubes in each 2-1/2"
diameter pipe, 90 degree U bend connections between pipe units, all
mounted on stainless steel ceiling mount rack |
|
32738p- |
Feldmeier,
Triple Pass Triple Tube, 1.5" x 2" x 2.5", 43' long |
|
54436- |
Feldmeier,
Triple Tube Heat Exchanger, all stainless steel, (6) 2-1/2" x 2" x
1-1/2" diameter tubes, 20 feet long, tri clamp ports with mounting
rack, single pass |
|
48974p- |
Feldmeier,
Triple Tube Heat Exchanger, stainless steel, consisting of (16) 252"
runs, on stainless steel frame, with 4 manifolds 1.5 x 2 x 2.5 |
|
54344p- |
Feldmeier,
Triple Tube Heat Exchanger, stainless steel, consisting of (36) 340"
runs, on stainless steel frame, with 3 manifolds, 40" W x 34" H x
396" OAL |
|
47499p- |
Feldmeier,
Tube in Tube Heat Exchanger, 2" outer tube, 1.5" inner tube, 6 runs
of 21', 4 runs of 18' & 10 runs of 18', all stainless steel |
|
47498p- |
Feldmeier,
Tube in Tube Heat Exchanger, triple tube, 2.5" outer tube, 2" center
tube, 1.5" inner tube, all stainless steel, 6 runs 20' long each |
|
54140p- |
Heat
Exchanger Tubular, 3" stainless steel liquid cooler/surge tube,
tubing is 304 stainless steel sanitary grade with 3" tri clamp
fitting on top & 3" tri clamp "T" fitting on bottom, both fitting on
same end, 18 passes for total of 396' of tubing, provides 310 square
feet of air cooling surface & 145 gallons of surge capacity,
supported on 304 stainless steel pipe frame with rubber insolated
clamps, 256" long x 32" wide x 90" tall overall dimensions |
|
42219p- |
Hebeler,
Shell & Tube Heat Exchanger, all stainless steel, never been
operated, was originally manufactured for Lockheed Martin, was
shipped to 1 of their jobsites but the project was scrubbed |
|
51653- |
Hot Water
Set, all stainless steel, immersion tube design, designed for hot
water, 3" diameter x 24" long, stainless steel immersion tube with
2" air operated steam valve, Anderson model 801 digital controller &
Tri Clover C216 2 HP, 1725 RPM stainless steel supply pump on
stainless steel stand with casters, never used |
|
51654- |
Hot Water
Set, all stainless steel, immersion tube design, designed for steam
injection, base mounted with Tri Clover model C114, 1725 RPM
stainless steel centrifugal pump discharging to 1-1/2" stainless
steel Tri Clover noiseless steam injector, includes 4" diameter x
60" tall, stainless steel immersion tube, Robert Shaw 1" self acting
steam valve, mounted to 42" long x 16" wide stainless steel base |
|
48975p- |
Hot Water
Set, consisting of Alfa Laval model LKH2525MDG25TSPNDE802, 15 HP
centrifugal pump S/N 79407, 3" x 2.5" clamp ports, 3510 RPM
230/460V, Enerquip stainless steel shell & tube S/N 6735, National
Board #5328, MAWP 150 PSI at 375º F, Wessel's Company tank MAWP 125
PSI at 240º F, MDMT 20º at 125 PSI, National Board #93910, Spirax
Sarco valves & steam trap, all mounted on stainless steel frame with
adjustable ball feet, 30" wide x 100" long x 99" high |
|
55258p- |
Hot Water
Set, consisting of Ampco model A3U401601100D3G 10 HP centrifugal
pump (S/N S-1990), 2" x 1-1/2" clamp ports, 3450 RPM 230/460V, Bell
& Gossett part #BY526200111100, stainless steel shell & tube (S/N
914988-01), National Board #106652, MAWP 150 PSI at 375º F, MDMT
-20º F at 150 PSI, Spirax Sarco type PN5320 steam valve, ITT Hoffman
Specialty steam trap model FT030C, maximum 175 PSI, maximum
temperature 377º F, Nema 4X stainless steel control panel with
Anderson 801 loop controller, all mounted on stainless steel frame
with adjustable ball feet, 26" wide x 60" long x 85" high |
|
52409p- |
ITT
Industries, Shell & Tube Heat Exchanger model APX15.7SQFT, features
stainless steel shell tubes with 80-3/8" OD x 24" long tubes,
approximately 15.7 square foot heat exchange surface dual pass
design, National Board #118412 rated for 225 PSI at -20º F to 450º F
on tube side, 1.5" inlet & outlet to tube & shell sides with NPT
connections, additional inlets for body drain & pressure gauges,
mounted on low profile stand, former application ethical
pharmaceutical |
|
46063- |
Millipore,
Multi Tube Heat Exchanger, 2" deep x 36" long stainless steel with
14 each 1/4" tubes, 2" clamp product connections, 3/8" media
connections |
|
51659- |
Mueller,
Triple Tube Heat Exchanger, all stainless steel welded design, (2)
2-1/2" x 2 x 1-1/2" diameter tubes, 20' long, tri clamp ports with
mounting rack |
|
51660- |
Mueller,
Triple Tube Heat Exchanger, all stainless steel welded design, (4)
2-1/2" x 2 x 1-1/2" diameter tubes, 20' long, tri clamp ports with
mounting rack |
|
51662- |
Multi Tube
Heat Exchanger, all stainless steel, (1) 6' long x heat exchanger
section with 10 each 1/2" product tubes in 4" stainless shell, 4"
tri clamp product connections, 1" media tri clamp connections |
|
52083- |
Multi Tube
Heat Exchanger, all stainless steel, (2) 6' long heat exchanger
sections with 5 each 1/2" product tubes in 2 1/2" stainless shell,
180 degree U bend connections between pipe units, 2" tri clamp
product connections, 1" media tri clamp connections, mounted on
stainless support frame. |
|
51664- |
Multi Tube
Heat Exchanger, all stainless steel, (2) 6' long heat exchanger
sections with 5 each 1/2" product tubes in 2-1/2" stainless shell,
180 degree U bend connections between pipe units, 2" tri clamp
product connections, 1" media tri clamp connections, mounted on
stainless support frame |
|
51655- |
Pick,
Direct Steam Injection Heater model SC50, sanitary, 3" tri clamp
steam inlet, 5,000 lb/hr steam capacity, includes 2" Fisher
modulating steam valve, 2" sanitary spring check valve, product
temperature controller, air pressure regulator, I/P transducer, 3"
tri clamp RTD, never used |
|
48246p- |
Repco
Engineering, Shell & Tube Heat Exchanger model 185104, 315 square
feet with 316 stainless steel tubes, shell, tube sheets & head, 198
tubes, ½" outside diameter x 9' long x 18" diameter, shell is 10
pass on the tube side, U tube construction, rated 125 PSI tube &
shell side at 300º F, shell side has 2" & 3" flanged inlet & 2 at 2"
flanged outlet, tube side has 2" tubing quick connect in/out on
removable head, Underwriter's code stamp, shell measures ¼" thick,
heads are 1.625" thick |
|
51652- |
Repco
Engr., Shell & Tube Heat Exchanger model 8560BEU, 8" diameter x 74"
long, stainless steel tubes, tube sheet & head, suitable for CIP up
to 120 GPM, 4 pass design, 39.26 square feet, 3" FPT steam inlet, 2"
FPT water ports |
|
51644- |
Scherping,
Shell & Tube Heat Exchanger model 69531, all stainless steel
steam/water application, 2-1/2" tri clamp in/out ports, straight
through design, 6" diameter x 9' long heat exchange area, 4" 8-bolt
ANSI flange, 2" NPTF & 1' NPTF connections on shell, 1 concentric 6"
tri clamp to 2-1/2" reducer & 1 eccentric 6" tri clamp to 2-1/2"
reducer |
|
50195- |
Shell &
Tube Heat Exchanger |
|
13692- |
Shell &
Tube Heat Exchanger model P1684, (50) ½" tubes 7½" L, stainless
steel, U tube design, 3" inlet & outlet on same end with tri clamp
fittings, 5" top opening with ANSE flange fitting, unit is 8' long x
8" diameter. |
|
13686p- |
Shell &
Tube Heat Exchanger model U TUBE, 331 square foot with carbon steel
tubes & carbon steel shell, National Board #5494, it is a regular U
tube heat exchanger tubes are 5/8" outside diameter & .065AVE,
maximum working pressure is 150 PSI full vacuum on the tubes & 150
PSI at full vacuum on the shell 400º F, this unit has a 3 in
openings on both ends, from tube sheet to tube sheet it is 7', 16"
diameter & has a round cap on each end, which makes it overall 105"
used horizontally |
|
50313- |
Shell &
Tube Heat Exchanger, 200 square feet, stainless steel, 114 tubes,
5/8" outside diameter x 16 gauge x 11' long, unit is 6 pass on the
tube side, U tube construction with carbon steel shell, rated 75 PSI
tube & shell side ATY 150º F, removable head can be modified for 2
pass by removing baffles in head, stainless tube bundle is removable
for cleaning, shell side has 3" flanged inlet & outlet, tube side
has 2" flanged inlet & outlet |
|
46689- |
Shell &
Tube Heat Exchanger, locally fabricated skid mounted hot water make
up set consisting of Bell & Gosset model SU1022, Ampco model DC2,
7.5 HP 3500 RPM recirculation pump, Sinclair Collins 1.5" modulating
steam valve, sacra steam trap all mounted on stainless steel skid,
approximate capacity of 100 GPM |
|
49475p- |
Shell &
Tube Heat Exchanger/Cooler, all T316 stainless steel product
contacts, consists of 5 sections: (2) 3" diameter x 20' long all
stainless steel shell & tube heat exchangers each with (7) 9/16"
diameter tubes inside 3" outer diameter shell, (2) 2" diameter x 20'
long all stainless steel shell & tube heat exchangers, each with
1.25 inner diameter tube inside spiral embossed outer shell with at
least 1/2" internal clearance above surface of inner tube, (1) 1.5"
diameter x 45' single wall stainless steel pipe, all mounted on a
tubular stainless steel frame, all sections are currently plumbed
together for it's last use as a chiller for pasteurized citrus juice
using low pressure cooling media, could easily be re-plumbed for
another requirement via 2" & 3" tri clamp media & product
inlet/outlet fittings, shells/tubes are not tagged for steam
pressure & are suitable for low pressure heating or cooling media |
|
51643- |
Shell &
Tube Hot Water Make Up System, frame mounted with Armstrong heat
exchanger, 12' diameter x 52" long, mounted on frame with 5 HP 3500
RPM water pump & steam trap, Bell & Gossett condensate return,
includes Fisher pressure reducing valve & modulating valve |
|
52082- |
Shell &
Tube Hot Water System, mounted on stainless steel frame with Bell &
Gossett heat exchanger, 8" diameter x 76" long model SU862 S/N
709165-01, mild steel exterior, 3/4" diameter, copper tubes overall
dimensions 7' 6 " long x 30" wide x 7' high including piping,
provided with a recirculation pump. |
|
51145- |
Shell &
Tube, 36" long x 8" diameter |
|
51144- |
Shell &
Tube, 42" long x 4" diameter, 60 tubes, all stainless steel |
|
51656- |
Stevac,
Tubular Product Heater model SV9, designed for product heating with
steam, (18) 1" tubes x 6' long, stainless steel exterior, mild steel
stand, clamp style returns |
|
43270p- |
Taco,
Shell & Tube Heat Exchanger model G12214TS1C1AT00, 2 pass, 4" inlet
& outlet, 3/4" copper tubes, 280.6 square foot heat exchange
surface, dimensions 100-1/4" overall length x 12-3/4" diameter,
National Board #186911, maximum working pressure 150 PSI at 375º F |
|
52598p- |
Triple
Tube Heat Exchanger, stainless steel, consisting of (24) 360" runs
of 1.5" x 2" x 2.5", mounted on stainless steel frame, 3" clamp
ports, 84" OAHT |
|
52243- |
Tube &
Shell Heat Exchanger, 44 at 31" x .5" inner tubes, 38" long x 16"
wide x 11" tall |
|
48973p- |
Tube Style
Hot Water Set, with 2 HP MP pumps recirculating pump, 3500 RPM
230/460, 4" diameter x 47" long tube dimensions |
|
|
|
