Storage Tanks
New Arrivals
Inventory
Agitator Types
Home Page
Refrigerated Horizontal
Refrigerated Vertical
Refrigerated Rectangular
Insulated Horizontal
Insulated Vertical
Insulated Rectangular
Single Shell Horizontal
Single Shell Rectangular
Silo
Cone Bottom
Farm Tank
Multicompartment
Sugar
Truck Tank
Other Than Dairy
Vacuum Tank
|
|
Item # |
DESCRIPTION |
|
37448p- |
Crepaco,
Tank model BWT, stainless steel, totally enclosed with 18" manhole,
stainless steel with stainless steel frame, cone bottom to 3" center
bottom outlet, 50" diameter x 16" deep, hangs in a frame on a weigh
cell |
|
53559- |
7,000
liter capacity Jacketed Tank, with rotary palm agitator, 316
stainless steel, cone bottom, last used for fermenting |
|
53557p- |
5,000
liter capacity CMP, Cone Bottom Tank, 316 stainless steel, last used
for fermenting |
|
53560p- |
4,000
gallon Jacketed Tank, dome top, cone bottom, hopper bottom, 100"
diameter, 73" height of body from top of dome to top of hopper, 149"
total height of tank, last used for fermenting |
|
48655p- |
3,500
gallon L & A Engineering, Stainless Steel Tank, single shell all
T304 stainless steel, 7.5' diameter x 10', 14.5' high over all,
closed top with three 2" tri clamp fittings, cone bottom to 2" tri
clamp fitting, 16" side bottom manhole, used for vegetable oil |
|
51425p- |
3,200
gallon Storage Tank, vertical, stainless steel cone bottom, 8'
diameter x 8' straight side, 1.5' cone bottom, 1 HP Lightnin series
10 top mount agitator with two 4 blade props, agitator requires
230/460 vac 3 phase electrical supply, top has three 6" & one 2"
pipes with a 18" manway, side has one 3" flanged fitting near the
bottom, conical bottom has one 4" flanged fitting near top of the
cone & 4" flanged center discharge, on carbon steel braced legs with
a discharge height of 80" |
|
48653p- |
3,000
gallon Tank, stainless steel with mild steel legs, 10' diameter x 5'
deep, cone bottom with 6" flanged outlet |
|
40989p- |
2,300
gallon Single Shell Tank, vertical, cone bottom, stainless steel,
open top with center bridge & 2 piece covers 3" center bottom outlet
no agitation 90" diameter x 84" deep x 106" high on 6 stainless
steel legs. |
|
48877p- |
2,290
gallon GH Hicks & Sons, Vertical Tank, 316 stainless steel, 84"
diameter x 91" straight side height x 12" cone bottom, 10" cone top,
135" overall height with legs & top fittings, 18" manway, three 4"
sanitary fittings & 2" sanitary fitting, bottom has 4" sanitary
center discharge & 2" off center sanitary fitting, side has 2" & 4"
sanitary fitting near bottom, welds are polished, sidewall & top are
10 gauge 316 stainless steel, bottom is 8 gauge 316 stainless steel |
|
48878p- |
2,290
gallon GH Hicks & Sons, Vertical Tank, 316 stainless steel, 84"
diameter x 91" straight side height x 12" cone bottom, 10" cone top,
135" overall height with legs & top fittings, 18" manway, three 4"
sanitary fittings & 2" sanitary fitting, bottom has 4" sanitary
center discharge & 2" off center sanitary fitting, side has 2" & 4"
sanitary fitting near bottom, sidewall & top constructed of 10 gauge
316 stainless steel, bottom constructed of 8 gauge 316 stainless
steel, last used on toothpaste |
|
46777p- |
2,000
gallon Stainless Fabricators, sanitary Double Motion Mix Tank, sweep
mixer with scrapper blades has 15 HP motor into Nord gear 22 RPM,
center agitation with 2 sets of turbine blades has 15 HP into Nord
gear 112 RPM, motors rated 230/460, 3 PH, 38.4/19.2 amp, 60 Hz, has
bottom mounted 4" actuated ball valve, cone bottom, dish top, 6'
diameter x 10' height, mounted on legs |
|
53173- |
2,000
gallon Cone Bottom Tank, single shell, vertical, stainless steel,
71" diameter x 113" x 8" cone bottom, flip lid |
|
48876p- |
1,820
gallon Vertical Tank, 316 stainless steel, 84" diameter x 72"
straight side height x 12" cone bottom, flat top, 124" overall
height with legs & top fittings, 18" manway, two 4" & two 2"
sanitary fittings, bottom has 6" sanitary center discharge |
|
48875p- |
1,800
gallon Mueller, Vertical Tank, 316 stainless steel, 78" diameter x
84" straight side height x 12" cone bottom, flat top, 132" overall
height with legs & agitator, 18" manway, two 4", two 2", two 3" &
two 1" sanitary fittings, bottom has 4" sanitary center discharge,
side has one 2" & one 4" threaded fittings, agitator has gear drive,
shaft & rake type prop but is missing 10 HP motor |
|
52396p- |
1,800
gallon Acme, Cone Bottom Tank, open top, stainless steel, 8-1/2'
diameter x 4' straight wall x 3-1/2' cone |
|
48874p- |
1,730
gallon GH Hicks & Sons, Vertical Tank, 316 stainless steel, 76"
diameter x 84" straight side height x 12" cone bottom, 134" overall
height with legs & agitator, 18" manway, one 4" & one 2" sanitary
fitting, bottom has 4" sanitary center discharge, 4" off center
sanitary fitting, side has one 4" sanitary fitting near bottom, 5 HP
sweep type agitator, requires 230/460 vac electrical supply |
|
49554p- |
1,600
gallon Cone Bottom Tank, stainless steel 70" diameter x 8' high
straight sided, with additional 2' cone depth, 4" center bottom
outlet with gate valve, 6" diameter overflow opening behind a "dam",
that drain overflow level effectively 4" from top lip of tank, all
stainless steel vessel with painted steel external legs, existing
legs provide for 6" discharge height from bottom of valve as
configured, 143" overall/infeed height, needs clean up, minor dings,
available for timely shipment |
|
48873p- |
1,570
gallon Vertical Tank, stainless steel, 78" diameter x 72" straight
side height x 12" cone bottom, flat top, 118" overall height with
legs & top fittings, 18" manway, two 4" & two 2" sanitary fittings,
bottom has 6" flanged center discharge, side has 4" sanitary fitting
near the bottom |
|
51735p- |
1,500
gallon Perry Products, Storage Tanks, with cone bottom, stainless
steel, 84" diameter x 66" straight side x 84" cone, 13' overall
height |
|
37444p- |
1,500
gallon Mueller, single shell Blending Tank, stainless steel
construction, approximately 7' diameter x 5½' deep x 116" tall, cone
bottom to 3" center outlet, 18" manhole with cover, bottom blade
agitation with 1 baffle & 2 sprayballs |
|
47830p- |
1,200
gallon Cone Bottom Tank, offset, open top, horizontal turbine style
mixer, 60" diameter, 72" sidewall, 40 HP motor, 8" offset bottom
outlet, 126" overall height, 7' overall width at narrowest position,
mixer has 2" shafts, gate valve on outlet |
|
11266p- |
1,000
gallon Single Shell Tank, stainless steel, vertical, cone bottom,
closed top, 18" diameter manhole on top with 1.5" tri clamp fitting,
2" tri clamp fitting on side, a 1.5" fitting on edge, 5' high
straight side, legs raise it 38" off the ground, legs are carbon
steel 3" diameter, on the slope it is 38" high with a 3" bottom
center threaded drain, vessel is 5' diameter. |
|
35245p- |
1,000
gallon Single Shell Tank, open top, cone bottom, stainless steel,
non adjustable legs, 3" NPT outlet, side mounted skimmer overflow,
2B interior & exterior finish, 66" diameter x 60" straight side plus
30" cone x 120" overall height |
|
33900p- |
1,000
gallon Mojonnier, stainless steel cone bottom vertical Tank, sweep
agitation, 36" straight side, 12" dome top, 24" cone bottom, 138"
overall height, dual speed motor provides 1725 RPM at 1.5 HP for 12
RPM agitator output speed or 850 RPM at .75 HP for 6 RPM agitator
output speed, requires 220 vac 3 phase 60 Hz power supply, 175 PSI
at 200º F jacket, internal pressure 10 PSI at 200º F, 2" center
discharge, 2.5" in feed, 18" manway with 4" sight glass, equipped
with CIP, National Board #7997 |
|
54923p- |
1,000
gallon Cone Bottom Tank, 5' diameter x 7' straight side, open top
with cover, 60 degree cone bottom, (1) 3" top side inlet, 1 center
bottom outlet, hip sockets with pipe legs |
|
49547p- |
950 gallon
Vertical Cone Bottom Storage/Mix Tank, stainless steel 62" diameter
x 84" overall depth, 68" high straight sides, open top, cone bottom
with 2" threaded center bottom discharge, 16" discharge height,
painted steel support legs, clamp style mixer mount, 102" overall
height |
|
37829p- |
800 gallon
Tank, stainless steel, cone bottom, open top, 57" diameter x 66"
straight side, 139" overall height, 2" center discharge, three 2"
sight glasses on side, on carbon steel legs |
|
55181- |
650 gallon
capacity 3M, Holding Tank, all stainless steel, cone bottom, single
wall, manway on top with hinged cover & approximately 18" diameter,
2" diameter threaded outlet, 58.5" diameter x 51" sidewall x 36"
long cone, approximate on gallons |
|
54130- |
625 gallon
Cone Bottom Tank, vertical, stainless steel, 56" diameter x 55"
straight side, 12" cone bottom, 7' 8" overall height with carbon
steel legs, open top, 2" center discharge with "T" & 2 ball valves,
equipped with (2) 2" sight glass in side, 34" high section has been
bolted on using gasket seal (this section not included in overall
height & volume calculations |
|
42969p- |
500 gallon
Tank, closed top, outside steam water coil for heating & cooling,
stainless steel insulated shroud, 15 degree cone bottom, 52"
diameter x 50" straight side, on 4 steel legs, has (2) 2" top
inlets, 16" diameter, 12 bolt top mixer mount with steel reinforced
mixer bridge, 16" diameter top manway with flip top hatch, 4" 4 bolt
flanged outlet, has 4 internal baffles, separate bottom & side
jackets for hot or cold water. |
|
11249p- |
500 gallon
Single Shell Tank, stainless steel, cone bottom, 3" center tri clamp
discharge, 57" high on straight side x 4' diameter, rolled lip on
the top, cone is 30" long, open top with hinged cover, saddles to
support tank on sides, no legs, cone is 18" to the bottom of the
cone & 22" to the bottom of the tri clamp fitting. |
|
43663p- |
500 gallon
OVC Tank, 50" diameter x 60" high, vertical open top, slightly cone
bottom with approximate 1.5" center bottom outlet, tri clamp,
mounted on mild steel pipe legs, approximately 12" discharge height |
|
23833p- |
435 gallon
Vertical Tank, dish top, 18" cone bottom, 48" SWH x 48" diameter, 3"
bottom off center discharge with sight glass, 8" hinged top manway,
stainless steel |
|
43058p- |
375 gallon
Hebeler Welding Co., Inc., Cone Bottom Tank model 36" SEPVLS257,
316L stainless steel, ELIMINATOR 257A, shell MAWP20/full vacuum at
250º F, 2 manholes on the side (1) 18" & (1) 14", 40" diameter & 58"
on the straight side, cone is 33", it tapers down to 2.5" bottom
discharge, unit was supported on I beams. |
|
55194p- |
375 gallon
Cone Bottom Tank, stainless steel, vertical, 44" diameter x 55"
straight side x 9" cone bottom, open top with hinged lid, conical
bottom has 8" flanged center discharge that is reduced to 2", side
has 3" flanged fitting & thermowell, tank stands 72" high on carbon
steel legs & load cells |
|
49543p- |
350 gallon
Vertical Cone Bottom Tank, stainless steel 38" diameter x 78"
straight sided, open top with shallow cone bottom to 1.2" center
bottom outlet at 8" clearance height, additional 1.5" threaded
bottom side discharge port, 94" overall height, all stainless steel
construction, high toned scalloped exterior finish, previously used
in winery, available for immediate shipment |
|
54127- |
350 gallon
Cone Bottom Tank, stainless steel conical bottom, vertical, 36"
diameter x 80" straight side x 9" cone bottom, open top, conical
bottom has 8" flanged center discharge, reduced to 2" flanged & 3/4"
threaded discharge, 4" flanged fitting & 1" flange fitting in cone,
electric heating coil in bottom with thermostat, unit stands on 4
load cells & 104" overall height |
|
54128- |
350 gallon
Bistol Metal Products, Cone Bottom Tank, stainless steel, 36"
diameter x 80" straight side x 9" cone bottom, open top, conical
bottom has 8" flanged center discharge that is reduced to 2" flanged
& 3/4" threaded discharge, 4" flanged fitting & 1" flange fitting in
cone, electric heating coil in bottom with thermostat, 96" overall
height |
|
33044p- |
320 gallon
Flat Top Tank, stainless steel, slight cone bottom, 46" diameter x
46" straight side height, 28" angle legs, 71" overall height, two 4"
side top flanges & 4.5" bottom flange discharge |
|
37440p- |
250 gallon
Chester Jensen, stainless steel Cone Bottom Tank, model 107075121,
100 PSI, with hinged cover, 3" tri clamp outlet, stainless steel
basket with ½" perforations, 48" diameter, National Board #4226 |
|
30821p- |
225 gallon
stainless steel Tank, cone bottom, closed top, 2" center bottom
discharge, top has 2½" flanged inlet & 7½" x 14" top manway,
agitated with 5 HP 220/440 volt gearhead motor with 42 RPM output,
top center entering, on legs |
|
43055p- |
200 gallon
Hebeler, Cone Bottom Tank |
|
48872p- |
200 gallon
Electric Heated Tank, cone bottom, 12 gauge 316L stainless steel, CP
#183145, 36" diameter x 44" straight side x 24" cone bottom, domed
top with 18" manway, three 1.5" & two 2" sanitary fittings, bottom
has center 2" discharge with electrically operated valve, conical
bottom has thermowell, insulated with an electrical warming (120º F)
jacket on straight & conical portions of tank, mounted on load cells
to give electronic weight readouts, part of a portable oil delivery
system last used for castor oil, stainless steel caster mounted skid
includes Waukesha 60 positive displacement pump & various fittings &
valves to transfer oil from tank to other operations, requires 480
vac 3 phase & 120 vac single phase electrical, pneumatic supplies |
|
46761p- |
160 gallon
Cone Bottom Mix Tank, 316SS stainless steel, single shell with split
hinged lid, top inlets are 6", 3", 2" with sanitary tri clamp
connections, 2" bottom outlet, lift lugs, flat top, 1.5" shaft with
2 each props attached to the shaft, 3 each blades on props that are
8" long & pitched for better bite on the product blending, 36"
diameter x 34" straight wall x 83" overall height dimensions |
|
51153p- |
150 gallon
OHI Food Process Equipment Mfg., Cone Bottom Tank, with lid |
|
44177p- |
150 gallon
Mix Tank, stainless steel 36" diameter x 36" straight height flat
top slight cone bottom 1-3/4" center bottom outlet with valve 1/2 HP
motor agitator thru right angle gear box inlets (2) 1" hinged cover
with 4" x 4" opening jacketed on straight side unit is on (4) 63"
legs with baffles |
|
55240p- |
150 gallon
Cone Bottom Tank, single shell, cylindrical, vertical, bridge &
cover top with hinged lids, (2) 2" clamp top ports, 4" clamp center
bottom outlet, 7" outlet height, 46" diameter x 17" straight side x
53" OAHT, stainless steel legs with adjustable ball feet |
|
40986p- |
135 gallon
Single Shell Tank, cone bottom, 47" diameter 13" deep x 84" high on
stainless steel legs, rectangular outlet, scrape agitation |
|
47476p- |
125 gallon
Tank, 304 stainless steel, 24" diameter x 48" straight side x 24"
deep cone bottom, vertical with quick opening top, last used as
flash vessel for cheese cooling & evaporating, 6" diameter,
tangential side inlet, 4" diameter center bottom outlet with Tri
Clover fitting, 1.5 HP motor with right angle gear box with center
agitator with vertical auger discharge screw bottom |
|
41665p- |
125 gallon
Single Shell Tank, cone bottom, vertical, stainless steel, open top
with 4" center bridge & 2 piece covers 46" diameter x 22" deep x 54"
high with stainless steel legs 4" outlet scrape agitation |
|
52392p- |
100 gallon
Portable Tank, all stainless steel construction, 40" diameter x 22"
straight side, flat top, cone bottom, 12" diameter top opening, 10"
outlet, on 4 legs with casters |
|
52227p- |
100 gallon
Open Top Tank with lid, cone bottom, stainless steel, 33" diameter x
23" straight side height, 19" cone bottom, 48" overall height with
casters, 2" Cam-lock fitting on bottom, tank is on cart with casters
& handle for portability |
|
51152- |
100 gallon
Cone Bottom Tank, no lid |
|
52843p- |
100 gallon
capacity Cone Bottom Tank, all stainless steel, low pressure jacket,
sprayball, 30" ID x 38" on straight side with 21" deep cone to 4"
tri clamp discharge, top manway, sidewalls insulated |
|
54516p- |
75 gallon
Finish Thompson, Portable Tank model AC85SJS1V730BO118XX, stainless
steel, skid mounted, 31" diameter x 20" straight side x 14" cone
bottom, tank mounted on 32" x 49" stainless steel boxed frame, 3 HP
pump drive Leeson 208/280/460/3 phase 1770 RPM, features square D
wash down controls |
|
54549p- |
60 gallon
Open Top Tank, sanitary stainless steel, 31" diameter x 18" straight
side with 8" deep 30 degree cone bottom, 1.5" center bottom
discharge with sanitary Acme threaded connection, 60" floor
clearance, 4 stainless steel legs welded to painted mild steel legs,
interconnected at 2 levels |
|
48767p- |
50 gallon
Insulated Cone Bottom Tank, stainless steel exterior, 2" center
bottom outlet, 2 piece cover, no agitation, 22" diameter x 34" deep,
available with suspended mounting or stainless steel legs. |
|
54542p- |
40 gallon
(approximate) Feed Tank/Hopper, stainless steel, 20" diameter x 16"
straight side x 14" depth cone bottom, 2" center bottom outlet with
tri clamp connections plus 16" floor clearance, flat closed top with
5 tri clamp inlets, mounted on 3 stainless steel legs |
|
48952p- |
30 gallon
Vertical Single Shell Mix Tank, bridge & cover top, cone bottom,
vertical side & bottom scrape agitator, 3" center bottom clamp
outlet, 17" outlet height, 38" diameter x 65" OAHT, stainless steel
legs with adjustable ball feet |
|
37460p- |
30 gallon
capacity stainless steel Tank, 19" diameter x 27" deep, cone bottom,
electric heated with water jacket, 1" outlet, cover |
|
41004p- |
25 gallon
Cone Bottom Single Shell Tank, vertical open top, stainless steel,
24" diameter x 17" deep x 54" high on stainless steel legs 1/2"
clamp, center bottom drain, two 1½" clamp ports on side |
|
38206p- |
25 gallon
Closed Top stainless steel sanitary Tank 20" diameter x 16" straight
side with 14" deep 60 degree cone bottom to 2" discharge with tri
clamp connection & 16" floor clearance flat top with 5 top inlets
with tri clamp connections formerly used as supply tank in cosmetic
packaging application |
|
47146p- |
18.5
gallon Lee, Lab Mix Tank, 304 stainless steel, cone bottom, 3' long
x 3' high x 18" diameter |
|
47145p- |
16 gallon
Lee, Lab Mix Tank, 304 stainless steel, cone bottom, 3' long x 3'
high x 18" diameter |
|
47147p- |
16 gallon
Lee, Lab Mix Tank, 304 stainless steel, cone bottom, 3' long x 3'
high x 16" diameter |
|
11219p- |
15 gallon
(19½ gallon full), stainless steel Tank model 15, cone bottom, non
hinged cover, 8" deep cone bottom to a 3" tri clamp drain, 1 in side
inlet near top tri clamp fitted, 1.5" square stainless steel legs 2
only. |
|
11220p- |
15 gallon
(19½ gallon full), stainless steel Tank model 15, cone bottom, 12"
straight side, 8" deep cone to a 3" tri clamp drain, 1" inlet pipe
thru side of tank extending into the tank, screen at bottom where
straight side stops with (100) 1" openings no cover, overall size
20" diameter x 22" high. |
|
52250- |
13 gallon
Walker, Mix Tank, domed top, cone bottom, vertical, cylindrical
shape, 1" tri clamp outlet, stainless steel exterior, 77" high x 29"
wide x 29" long overall dimensions, ribbon type agitation, 2 HP 295
RPM 3 phase, manhole |
|
|
